Sale!

Schmid Tool Nickel Teflon Trigger + JP Ent. Enhanced Reliability Springs

(1 customer review)

$59.99

Description

Schmid Tool Nickel Teflon Trigger + JP Ent. Enhanced Reliability Springs

This set up is the standard FCG in our serious use guns and Law Enforcement Service Carbines (LESC). It’s smooth, reliable, drop safe and affordable

Mil-spec trigger groups are reliable, easy to service and inexpensive. The problem is, mil-spec triggers tend to have a heavy trigger pull (sometimes up to 8 or 9 pounds) and the gritty take-up makes it difficult to tell where the break will be. This is where the Schmid Single Stage Nickel Teflon Trigger Group comes in. Featuring honed and polished engagement surfaces, a slick and durable Nickel Teflon finish and finely tuned spring rate for the JP trigger and hammer springs, you get a smooth trigger pull with very little take-up and a crisp clean break.

This spring kit will yield a 3.5-4.5 lb. trigger pull with the Schmid NTFE trigger. This kit features a lightened trigger spring with an enhanced strength hammer spring.

Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, in other words, this trigger fucking slaps.

Includes: Trigger, Hammer, Disconnect, JP Enterprises Disconnect Spring, Trigger Spring, Hammer Spring, JTFCON Nitride Trigger / Hammer Pins

Made in the USA

Additional information

Weight 0.025 lbs

1 review for Schmid Tool Nickel Teflon Trigger + JP Ent. Enhanced Reliability Springs

  1. Billy Bob

    Great trigger with great springs. Pull weight is about 4.0-4.5lb as measured with my cheap trigger weight gauge. A little creep but not nearly as much as you get with the cheaper mil-spec ones. The JP springs are great and it is nice that it came with trigger pins.
    Will be buying another for my next build.

Add a review

Your email address will not be published. Required fields are marked *